(above) Another dry day, time to install the water diverter over the rear door…The channel was drilled out for the screws, then positioned over the door with three screws, then masking taped around to ease the clean up of the silicone caulking..



(above) Installed and cleaned up…I arched the channel slightly to ensure water flow outward…The attachment is with nine - 8/32 stainless screws, through bolted with fender washers on the inside…Silicone caulking between body and channel…



(above) It looks like a factory install…Later, I ran the driveway hose on the roof at full volume and the channel handled the volume of water just fine…


The channel can also be used for attaching a small, simple shade/awning…More options is a good thing…


With the leaks resolved, it is ready for the finish cabinetry…


More later…